 |
| Quantity: | |
|---|---|
DTE Series Tractors
Technical CharacteristicsTechnical Characteristics
●Newly developed narrow flat floor, wheelbase 0.96-1.1m; wide flat floor 1.2-1.3m; Kunming Yunnei Common Rail National IV engine;
●Standard equipped with double rotomolded fuel tanks on the left and right, with 40+ 60 liters dual fuel volume display, strong battery life;
●Clutch and brake pedals are suspended; shuttle shift and four-wheel drive control are centralized on the new instrument panel, which is more convenient to operate;
●Adopt side control pad, PTO shift control on the left side, hydraulic lift control on the right side;
●Newly developed "Tiger Crawler" series hood; upgrade the hood lock to make opening more convenient;
The hydraulic system adds a rotary oil suction filter and return oil filter, and the oil pipe is upgraded to a 24-degree cone structure, which is clean and reliable;
●Steering with large turning angle, smaller turning radius, more flexible turning operation at headland;
●Upgraded famous shock-absorbing mechanism and brand-new shock-absorbing floor mat, the shock-absorbing effect is good, and the driving operation is more comfortable;
The rear suspension is upgraded and strengthened; the lifting arm is strengthened; the lifting rod is strengthened;
●Independent research and development upgrade 8F + 8R high-strength transmission system, independent design and development of two cabinets. 1st, 2nd gears and high and low gears are all upgraded to meshing sleeve shifting, the gear modules are all enlarged and upgraded, the - shaft is thickened, the reliability of the new transmission system has been verified by the market to be zero failure, and the overall noise of the transmission system is greatly reduced;) Clutch Upgrade 10 o'clock double-acting imported ceramic friction plate;
●With Xulun A tires, 11.2-28 rear wheels, 7.50-1 6 front wheels;
Strong lifting and strong lowering hydraulic system, equipped with 2 sets of hydraulic output multi-way valves, and equipped with hydraulic auxiliary oil tank as standard;
●Various configurations such as air brake system, thickened axle shaft and wet brake are optional.
DET Series Product Parameter
Project | Unit | 504-C (G4) | 604-F (G4) | T704-C (G4) | K704-C (G4) |
National IV engine model/ manufacturers
| / | YN27PAF4/Yunnei V28- 50U42/Quanchai | YN27PAF4/Yunnei | YN27PAF4/Yunnei | YN27PAF4/Yunnei
|
Engine type | / | inline four stroke | inline four stroke | inline four stroke | inline four stroke |
Engine rated power | KW | 36.8 | 44.1 | 51.5 | 51.5 |
Calibration speed | r/min | 2400 | 2400 | 2400 | 2400 |
Dimensions (KxWxH)| mm | mm | 3500x1500x2200 (Top of safety frame) | 3600x1500x2200 (Top of safety frame) | 3600x1500x2200 (Top of safety frame) | 3600x1500x2700 (Top of cabin) |
wheelbase | mm | 1850 | 1850 | 1950 | 1950 |
Track (Front) | mm | 1070, 1170/1270 | 1070, 1170/1270 | 1070, 1170/1270 | 1070, 1170/1270 |
Track (Rear) | mm | 1000-1300 | 1000-1300 | 1000-1300 | 1000-1300 |
Minimum ground clearance | mm | 330 (bottom of front axle) | 360 (bottom of front axle) | 360 (bottom of front axle) | 360 (bottom of front axle) |
Tire Specifications (Front Wheels) | / | 7.5-16 | 8.3-20 | 7.5-16/8.3-20 | 7.5-16/8.3-20 |
Tire Specifications (Rear Wheel) | / | 11.2-28 | 12.4-28 | 11.2-28/12.4-28 | 11.2-28/12.4-28 |
Minimum use quality | kg | 1600 | 1800 | 1960 | 2100 |
Transmission gear (forward + reverse | / | 8F+8R/8F+2R | 8F+8R/8F+2R | 8F+8R/8F+2R | 8F+8R/8F+2R |
power output shaft speed | r/min | 540/760 | 720/850 | 720/850 | 720/850 |
DTE Series Tractors
Technical CharacteristicsTechnical Characteristics
●Newly developed narrow flat floor, wheelbase 0.96-1.1m; wide flat floor 1.2-1.3m; Kunming Yunnei Common Rail National IV engine;
●Standard equipped with double rotomolded fuel tanks on the left and right, with 40+ 60 liters dual fuel volume display, strong battery life;
●Clutch and brake pedals are suspended; shuttle shift and four-wheel drive control are centralized on the new instrument panel, which is more convenient to operate;
●Adopt side control pad, PTO shift control on the left side, hydraulic lift control on the right side;
●Newly developed "Tiger Crawler" series hood; upgrade the hood lock to make opening more convenient;
The hydraulic system adds a rotary oil suction filter and return oil filter, and the oil pipe is upgraded to a 24-degree cone structure, which is clean and reliable;
●Steering with large turning angle, smaller turning radius, more flexible turning operation at headland;
●Upgraded famous shock-absorbing mechanism and brand-new shock-absorbing floor mat, the shock-absorbing effect is good, and the driving operation is more comfortable;
The rear suspension is upgraded and strengthened; the lifting arm is strengthened; the lifting rod is strengthened;
●Independent research and development upgrade 8F + 8R high-strength transmission system, independent design and development of two cabinets. 1st, 2nd gears and high and low gears are all upgraded to meshing sleeve shifting, the gear modules are all enlarged and upgraded, the - shaft is thickened, the reliability of the new transmission system has been verified by the market to be zero failure, and the overall noise of the transmission system is greatly reduced;) Clutch Upgrade 10 o'clock double-acting imported ceramic friction plate;
●With Xulun A tires, 11.2-28 rear wheels, 7.50-1 6 front wheels;
Strong lifting and strong lowering hydraulic system, equipped with 2 sets of hydraulic output multi-way valves, and equipped with hydraulic auxiliary oil tank as standard;
●Various configurations such as air brake system, thickened axle shaft and wet brake are optional.
DET Series Product Parameter
Project | Unit | 504-C (G4) | 604-F (G4) | T704-C (G4) | K704-C (G4) |
National IV engine model/ manufacturers
| / | YN27PAF4/Yunnei V28- 50U42/Quanchai | YN27PAF4/Yunnei | YN27PAF4/Yunnei | YN27PAF4/Yunnei
|
Engine type | / | inline four stroke | inline four stroke | inline four stroke | inline four stroke |
Engine rated power | KW | 36.8 | 44.1 | 51.5 | 51.5 |
Calibration speed | r/min | 2400 | 2400 | 2400 | 2400 |
Dimensions (KxWxH)| mm | mm | 3500x1500x2200 (Top of safety frame) | 3600x1500x2200 (Top of safety frame) | 3600x1500x2200 (Top of safety frame) | 3600x1500x2700 (Top of cabin) |
wheelbase | mm | 1850 | 1850 | 1950 | 1950 |
Track (Front) | mm | 1070, 1170/1270 | 1070, 1170/1270 | 1070, 1170/1270 | 1070, 1170/1270 |
Track (Rear) | mm | 1000-1300 | 1000-1300 | 1000-1300 | 1000-1300 |
Minimum ground clearance | mm | 330 (bottom of front axle) | 360 (bottom of front axle) | 360 (bottom of front axle) | 360 (bottom of front axle) |
Tire Specifications (Front Wheels) | / | 7.5-16 | 8.3-20 | 7.5-16/8.3-20 | 7.5-16/8.3-20 |
Tire Specifications (Rear Wheel) | / | 11.2-28 | 12.4-28 | 11.2-28/12.4-28 | 11.2-28/12.4-28 |
Minimum use quality | kg | 1600 | 1800 | 1960 | 2100 |
Transmission gear (forward + reverse | / | 8F+8R/8F+2R | 8F+8R/8F+2R | 8F+8R/8F+2R | 8F+8R/8F+2R |
power output shaft speed | r/min | 540/760 | 720/850 | 720/850 | 720/850 |
